Approximate Brand:
UNS | Trademark |
N05500 | MonelK500 |
Chemical Constituents of Monel K500:
state | % | Ni | Cu | Al | Ti | Fe | Mn | S | C | Si |
Monle K500 | min | 63 | 27.0 | 2.30 | 0.35 | |||||
max | 33.0 | 3.15 | 0.85 | 2.0 | 1.5 | 0.01 | 0.25 | 0.5 |
Physical properties of Monel K500:
density | 8.05 g/cm3 |
Melting point | 1288-1343℃ |
Minimum mechanical properties of Monel K500 at room temperature:
Alloy state | TensileStrength | Yield Strength RP0.2N/mm2 | BrinellhardnessA5 % |
Monel K500 | 1100 | 790 | 20 |
The alloy has the following characteristics:
Monel K500 has the same corrosion resistance as Monel 400, but has higher mechanical strength and hardness. It has good heat corrosion resistance and long-term structure stability. It is mainly used to manufacture turbine blades and gas turbine blades with working temperature below 750 C on aeroengine, fasteners and springs on ships, pumps and valve parts on chemical equipment, scraper blades on papermaking equipment, etc.